KitchenAid KHPF 7520/I Instrukcja Obsługi Pobierz pdf (Strona 10)

The electrical connections must comply with current

legislation and be carried out by a qualified, competent

person.

• Information on the voltage and power absorbed are shown on the

serial no. plate.

• The appliance must be earthed.

• When installing the appliance, we recommend that this hob is

protected by a 3mm bi-polar switch.

• If damaged, the power cable must be replaced with an identical

type of powercable ( H05V2V2-FT90ºC, or H05RR-F type). We

recommend that this operation be conducted by our After Sales

Service. Please contact our Customer Care Centre on 00800-

3810-4026.

• Do not use extension leads.

• The manufacturer declines all responsibility for damage to

persons, pets or goods as a result of failure to comply with

the regulations above.

Electrical connection

Earth

(yellow/green)

Important: The following procedure must be carried out by

competent technical personnel only. The hob can be installed

on, or into different types of materials, such as masonry, metal,

wood and heat resistant laminate coated wood (90°C).

Cut an opening in the worktop to the dimensions shown in the figure

(Fig. 1).

Carefully place the gasket/seal on the external outline of the worktop,

as shown in the figure (Fig. 2). Apply a light but firm pressure to

ensure a good adhesion to the work surface.

Fix the hob using the fixing brackets provided.

The appliance is supplied with two types of brackets:

- no. 7 standard length brackets (Service code 4812 404 49874) for

installation on kitchen tops with thickness over 4 cm

- no. 7 long brackets (Service code 4812 404 49875) for installation

on kitchen tops with thickness below 4 cm.

The brackets must be fixed using the appropriate screws both at the

front (no. 4) and at the back (no. 3) using the seats at the bottom of

the hob (Fig. 3).

Note: the electrical power cable must be long enough to allow the

hob to be lifted out from above.

Fixing the hob to the work top. Traditionally fitted model

718

706

Fig. 3

Fig. 1

Fig. 2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

KitchenAid KHPF 7520/I Instrukcja Obsługi Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze KitchenAid KHPF 7520/I